Safety Procedures
All Material Safety Data Sheets must be read by all operators
- Eye Protection - safety glasses or full face mask must be used at all times
- Respiratory Mask - must be used at all times
- Plastic latex gloves - must be used at all times
- Plastic Apron - must be used at all times for clothing protection
In Case Of A Spill - General For All Solutions
- Isolate hazard area and keep people away.
- Eliminate all sources of ignition.
- Provide maximum ventilation.
- Do not release into soil, sewers or rivers.
- Wear proper protective equipment.
- Carefully mop spill and triple rinse with water into a suitable plastic container.
- Dispose of into Plating Solutions Waste Drum or suitable container.
- If Eye Contact :- Flush eyes with clean water for 15 Minutes. Consult Doctor
- If Skin Contact :- Flush with clean water for 15 Minutes.
- Inhalation :- Remove to fresh air and loosen clothing.
- Ingestion :- Do not induce vomiting, drink large quantities water or milk.
- Skin Contact :- Wash Hands with cold soapy water
- Must not be fushed in sewer or drain, neutralize with soda ash or lime
|
|
