Selective Plating Safety Procedures

TEI Main Site | Selective Plating | Safety and Regulations |  Selective Plating Safety Procedures

Safety Procedures For Plating Solutions

All Operators Must Read Safety Data Sheets Before Proceeding

  • Eye Protection - Safety Glasses or Full Face Mask Must be used at all Times.
  • Respiratory Protection - Respiratory Mask to be Used at all Times
  • Skin Protection - Plastic latex gloves to be Used at all Times
  • Clothing Protection - Plastic Apron, Impervious Boots as Required by conditions


Emergency First Aid and In Case Of A Spill

  • Isolate Hazard Area and Keep People Away
  • Eliminate all sources of ignition
  • Provide Maximum Ventilation
  • Do not release into soil, sewers or rivers
  • Wear Proper protective equipment
  • Carefully mop spill and triple rinse with water into a suitable plastic container
  • Dispose of into plating solutions waste drum or suitable container
  • If Eye Contact - Flush eyes with clean water for 15 Minutes. Consult Doctor
  • If Skin Contact - Flush with clean water for 15 Minutes.
  • Inhalation - Remove to fresh air and loosen clothing.
  • Swallowed : Do Not induce vomiting, drink quantities water or milk. Consult Doctor
  • (GOLD ONLY) Swallowed - Induce vomiting, drink quantities water. Consult Doctor

Wash Hands After Use - Eating or Drinking is Not Permitted in Plating Area's.

Site Terms | © Copyright 2007 TEI (NZ) Ltd.