Can ID & OD areas be plated as well as flat areas?

TEI Main Site | Selective Plating | FAQ's  |  Can ID & OD areas be plated as well as flat areas?

Yes all areas can be plated with the LDC selective brush plating. Spun bearings are a common repair on shafts or gear box housings and are ideally suited to brush plating.

Using some type of turning head or lathe to rotate the shaft or spindle or use an ID plater unit to plate gear box ID's.

(Manual Page 68)
Site Terms | © Copyright 2007 TEI (NZ) Ltd.